Page 1 of 1
1967 buick skylark ratio code list
Posted: Thu Sep 01, 2011 9:47 pm
by tlowe
Do you have a code list or a internet location to find the codes?
Pulled arear from a 67 skylark. Looks to be a VI code. What is the ratio? Save me from opening it up. Tom
Re: 1967 buick skylark ratio code list
Posted: Mon Sep 05, 2011 5:46 am
by monzaz
DOES NOT EXIST??? HERE IS WHAT WE HAVE i WILL LOOK INTO THIS FURTHER.
OPEN POSI
2.56 LK LV
2.78 LA LN
2.93 OB OW
3.08 LB LO
3.23 LC LP
3.36 LD LR
3.55 N/A ON
3.90 N/A OO
Closet thing I can see is MAYBE a VL or LV which is 2.56 posi
SURE it is BUICK original rear?
SHow some pictures of the rear. single webbing with NO extra supports? Jim
Re: 1967 buick skylark ratio code list
Posted: Mon Sep 05, 2011 5:50 am
by monzaz
Most 'V' code was used for FULL SIZE PONTIAC rears...??? Jim
Re: 1967 buick skylark ratio code list
Posted: Mon Sep 05, 2011 5:53 am
by monzaz
Nothing - CRACK it open is always the best way to get the correct ratio. Jim
Re: 1967 buick skylark ratio code list
Posted: Mon Sep 05, 2011 7:56 pm
by tlowe
Jim,
Once again, you are the man! I got a wire brush out on it. The code turned being a LA. On your list it is a 2.78 ratio. This is a spare now. It was exchanged for a 3.36 8.2 10 bolt. Wanted a 700r4 hooked to it. Tom
Re: 1967 buick skylark ratio code list
Posted: Sun Sep 18, 2011 10:16 am
by monzaz
Take care Tom. Hope all is going well for you.
Jim