custom g-body race street strip rearend 30 spline moser posi

Rear Ends and parts for sale
Post Reply
User avatar
monzaz
Average Poster
Posts: 984
Joined: Tue Nov 13, 2007 7:56 pm
Location: RICHFIELD, OH

custom g-body race street strip rearend 30 spline moser posi

Post by monzaz »

10 bolt 8.5 custom built street /strip/race

-10 bolt 8.5 custom built narrowed housing
-30 spline NEW eaton posi
-NEW 4.10 Yukon Performance gears
-NEW 30 spline MOSER ENGINEERING axles (5 4/34" GM wheel pattern)
-ALL new bearings and seals
-NEW urethane upper control arm bushings
-NEW upper double adjustable ICEMAN control arms custom built for J D Race
-NEW Aluminum race girdle support cover
-uses stock gm drum brakes from your 7.5 or 8.5 original gm rear

This rear will hold to what ever your gonna throw at it.


>>>>>>>>>>>>> $1695.00 <<<<<<<<<<<<<<<<<<

Pictures are of the actual rear end!!!!
Attachments
10 BOLT 8.5 G-BODY J D RACE REAR 004.jpg
10 BOLT 8.5 G-BODY J D RACE REAR 002.jpg
J D RACE g body 10 bolt 8.5 002.jpg
J D RACE g body 10 bolt 8.5 001.jpg
J D Race
MWireman
Rookie Poster
Posts: 17
Joined: Sun Aug 21, 2011 3:09 pm
Location: Greenwich,Ohio

Re: custom g-body race street strip rearend 30 spline moser

Post by MWireman »

Im curious, did u slide a smaller axle tube inside the old one or butt them together?
User avatar
monzaz
Average Poster
Posts: 984
Joined: Tue Nov 13, 2007 7:56 pm
Location: RICHFIELD, OH

Re: custom g-body race street strip rearend 30 spline moser

Post by monzaz »

In side. Makes it much stronger there then a butt weld. You will have 1/4" tube in that area like a dana 60 . A narrowing bar still needs to be used to get these tubes straight to the bearing end from the carrier saddles.

Jim
J D Race
Post Reply