custom g-body race street strip rearend 30 spline moser posi

Rear Ends and parts for sale
User avatar
monzaz
Average Poster
Posts: 832
Joined: Tue Nov 13, 2007 7:56 pm
Location: RICHFIELD, OH

custom g-body race street strip rearend 30 spline moser posi

Postby monzaz » Mon Oct 17, 2011 7:25 am

10 bolt 8.5 custom built street /strip/race

-10 bolt 8.5 custom built narrowed housing
-30 spline NEW eaton posi
-NEW 4.10 Yukon Performance gears
-NEW 30 spline MOSER ENGINEERING axles (5 4/34" GM wheel pattern)
-ALL new bearings and seals
-NEW urethane upper control arm bushings
-NEW upper double adjustable ICEMAN control arms custom built for J D Race
-NEW Aluminum race girdle support cover
-uses stock gm drum brakes from your 7.5 or 8.5 original gm rear

This rear will hold to what ever your gonna throw at it.


>>>>>>>>>>>>> $1695.00 <<<<<<<<<<<<<<<<<<

Pictures are of the actual rear end!!!!
Attachments
10 BOLT 8.5 G-BODY J D RACE REAR 004.jpg
10 BOLT 8.5 G-BODY J D RACE REAR 002.jpg
J D RACE g body 10 bolt 8.5 002.jpg
J D RACE g body 10 bolt 8.5 001.jpg
J D Race

MWireman
Rookie Poster
Posts: 17
Joined: Sun Aug 21, 2011 3:09 pm
Location: Greenwich,Ohio

Re: custom g-body race street strip rearend 30 spline moser

Postby MWireman » Sun Sep 02, 2012 5:32 pm

Im curious, did u slide a smaller axle tube inside the old one or butt them together?

User avatar
monzaz
Average Poster
Posts: 832
Joined: Tue Nov 13, 2007 7:56 pm
Location: RICHFIELD, OH

Re: custom g-body race street strip rearend 30 spline moser

Postby monzaz » Mon Sep 03, 2012 6:01 pm

In side. Makes it much stronger there then a butt weld. You will have 1/4" tube in that area like a dana 60 . A narrowing bar still needs to be used to get these tubes straight to the bearing end from the carrier saddles.

Jim
J D Race


Return to “Rear Ends and Parts”

Who is online

Users browsing this forum: No registered users and 1 guest