IHAVE ANOTHER SET OF 041 HEADS THAT ARE IDENTICAL FUEL HEADS
CASTING # 3947041 300 HORSE HEADS ON A STOCK PASSENGER, NOVA, CHEVELLE, CAMARO, 350 CI MOTOR
-HAVE ACCESSORY HOLES
-THICK CASTING HEADS FROM THE MUSCLE CAR ERA
-1.94 INTAKE
-1.50 EXHAUST
-64 CC COMBUSTION CHAMBERS
-GOOD USED SHAPE WERE RECONDITIONED ABOUT 3-4 YEARS AGO.
-THESE HEADS ARE COMPLETE ROCKERS NUTS VALVES ETC. BOLT ON READY
399.00 FOR THE PAIR
FUELIE HEADS 041 1969 HEADS
FUELIE HEADS 041 1969 HEADS
J D Race
-
- Rookie Poster
- Posts: 12
- Joined: Fri Feb 22, 2013 3:57 pm
Re: FUELIE HEADS 041 1969 HEADS
Hey Jim,
I know this is an old post but I was wondering if you had these or any similiar ready to bolt. And also any idea what the compression increase would be. I have a .030 over 350 with 76cc chamber heads now. Been told it was 8 to 1 compression right now.
It also has a relatively mild cam. .460 lift. Do you see any benefit from increasing compression on this motor?
Thanks
Bill
I know this is an old post but I was wondering if you had these or any similiar ready to bolt. And also any idea what the compression increase would be. I have a .030 over 350 with 76cc chamber heads now. Been told it was 8 to 1 compression right now.
It also has a relatively mild cam. .460 lift. Do you see any benefit from increasing compression on this motor?
Thanks
Bill
Re: FUELIE HEADS 041 1969 HEADS
Nothing right now. I will check with some freinds and see if they have anything. jIM
J D Race