71 Riviera 3.42:1 posi rear end.

Questions about all other brand differentials.
Post Reply
texasekberg
Rookie Poster
Posts: 11
Joined: Mon Jan 20, 2014 9:37 pm
Location: Kingwood, TX

71 Riviera 3.42:1 posi rear end.

Post by texasekberg »

Is it possible to fit a -71 Riviera rear end under a -65 A-body?
And if so what would it take?
Br Anton
User avatar
monzaz
Average Poster
Posts: 984
Joined: Tue Nov 13, 2007 7:56 pm
Location: RICHFIELD, OH

Re: 71 Riviera 3.42:1 posi rear end.

Post by monzaz »

Anything is POSSIBLE.... But to do this it will be way to wide and too much welding and special control arm mods. JUST not worth the effort. Not to mention unless it is a 8.5 10 bolt you will not ever be able to find parts for the rear. Jim

There are plenty of bertter donor rears all 1064-1972 will fit exactly gto Lemans tempest cutlass skylark monte carlo grand grix (69-72)

chevelle malibu
remember the 1964-1967 chevy rears will be the same width and the 68-72 will be slightly wider by 1" overall or 1/2" ON EACH SIDE. jIM
J D Race
Post Reply