Does the Carrier for a limitied slip 12 bolt rear end matter if it comes out of a lets say impala and is going into a 12 bolt chevelle.
Is there some way to tell what posi unit will or won't work in a 12 bolt chevelle rear
As always thanks for the info
Mikek
Carrier question
-
- Newbie Poster
- Posts: 8
- Joined: Thu Jul 06, 2006 9:07 pm
- Location: Elwood, New York
ID carriers
Oh geez. I am so sorry about the delay on alot of these emails. I finally have dsl and am ready to do some work. Jim
12 bolt chevy (c-clip axle retention) car differential carriers will all interchange from 1965 -1972
chevy II
Impala
Chevelle
Monte Carlo
El Camino
Camaro
Nova
Castings are as follows ---
_________________________
2 series ED 32088 2.56 and 2.73 factory gears
3 series 30140PM1 3.08 - 3.73 factory gears
4 series EDB 30174 3.90 and up Factory gears
I know it is late but I hope it may help some one else too. Jim
12 bolt chevy (c-clip axle retention) car differential carriers will all interchange from 1965 -1972
chevy II
Impala
Chevelle
Monte Carlo
El Camino
Camaro
Nova
Castings are as follows ---
_________________________
2 series ED 32088 2.56 and 2.73 factory gears
3 series 30140PM1 3.08 - 3.73 factory gears
4 series EDB 30174 3.90 and up Factory gears
I know it is late but I hope it may help some one else too. Jim