Olds Type 'O' casting date

Post Reply
GasRUp
Newbie Poster
Posts: 1
Joined: Thu Dec 13, 2018 8:32 pm
Location: SanAntonio,Tx

Olds Type 'O' casting date

Post by GasRUp » Fri Dec 14, 2018 1:53 pm

]Hello Mr. Jim.
I have a Oldmobile 12 bolt Type O posi rear end with TO stamped on the back passenger axle tube. I took off the cover and found 588 on the posi,which I take it to be 28 spline.
The gear ratio is 3.91 from what I found on the ring gear,11A43. The housing has 402227 with CFD 4 cast next to it,which I believe is a 1970 rear end. My question is where is the casting date of the housing located. I found a stamp # of 344 close to the filler plug and was hoping you can shed some light on what it means.
Thank you for any help you can give me.
Attachments
IMG_20181213_165419945.jpg
IMG_20181213_164344131.jpg

User avatar
monzaz
Average Poster
Posts: 854
Joined: Tue Nov 13, 2007 7:56 pm
Location: RICHFIELD, OH

Re: Olds Type 'O' casting date

Post by monzaz » Fri Dec 14, 2018 11:16 pm

From what we know there is not year on this casting 1970 was one year casting so really no need for one the 344 is the Julian date so it stands for the 344th day of that 1970 year. Pretty sure it was December 10th of 1970.
1970 will have a OILED axle bearing system and was the only year for this in the 12 bolt olds rear.
J D Race

Post Reply