Pinion Preload

stevieray
Rookie Poster
Posts: 12
Joined: Sun Feb 07, 2016 12:55 pm

Pinion Preload

Postby stevieray » Mon Feb 22, 2016 11:00 am

Is it possible to set pinion preload without a beam type torque wrench?

User avatar
monzaz
Average Poster
Posts: 832
Joined: Tue Nov 13, 2007 7:56 pm
Location: RICHFIELD, OH

Re: Pinion Preload

Postby monzaz » Mon Feb 22, 2016 2:35 pm

Yes you can guess and do it by feel....BUT you better know what a good preload feels like... :) Used will be less than 15" pounds and new will be 20" pounds.
Too tight and you will burn the bearings up...Too loose and the pinion will have deflection to the ring... It is not ROCKET science...But you could end up wasting more money than the cost of the wrench... See if you can borrow one from a local shop. Give them a 100.00 bill and they know you will be back... that is double what they cost...UNLESS they have a MATCO tool...lol. :) Jim
J D Race


Return to “10 Bolt Differential Questions”

Who is online

Users browsing this forum: No registered users and 1 guest