1971 Bucik 10 bolt 8.5 Axle bearings
-
- Newbie Poster
- Posts: 1
- Joined: Sat Oct 17, 2009 10:03 pm
1971 Bucik 10 bolt 8.5 Axle bearings
Hello, I've got a 1971 Buick 10 bolt 8.5 out of a skylark. It had 2.56 rear gears and I've upgraded it to 3.23 and posi. I am using original axles and would like to change out the old axle bearings. I been having a hard time finding them and was wondering if anybody has them or can get them.The originals are not that bad but would like to have new ones if I can. Also I have heard of upgrading the axles and posi top 30 spline and would like info on what parts I need to upgrade in the future. Thank you
Re: 1971 Bucik 10 bolt 8.5 Axle bearings
Yes we have the bearing and seals... Numbers are in the I D Differential section here on J D Race.com
A9 is the bearing x2
712146 is the seal x2
We have them for 69.00 that will do BOTH side for you.
Shipping is about 7.50
30 spline axle upgrade:
These would be CUSTOM MOSER RACE AXLES.
We can save you some money on them as we sell for Moser Engineering.
Normal Moser price for these axles are 345.00 PLUS SHIPPING.
We can do 329.00 Plus Shipping...That is NOT much savings BUT it is something and will at least save you shipping cost. Jim
A9 is the bearing x2
712146 is the seal x2
We have them for 69.00 that will do BOTH side for you.
Shipping is about 7.50
30 spline axle upgrade:
These would be CUSTOM MOSER RACE AXLES.
We can save you some money on them as we sell for Moser Engineering.
Normal Moser price for these axles are 345.00 PLUS SHIPPING.
We can do 329.00 Plus Shipping...That is NOT much savings BUT it is something and will at least save you shipping cost. Jim
J D Race