10 bolt Skylark, GS, Custom 68-70 GEARS ARE HERE!!!

Post Reply
User avatar
monzaz
Average Poster
Posts: 985
Joined: Tue Nov 13, 2007 7:56 pm
Location: RICHFIELD, OH

10 bolt Skylark, GS, Custom 68-70 GEARS ARE HERE!!!

Post by monzaz »

So finally we have done it. We now support the 10 bolt 8.2 Buick 1968 -1970 rear differentials with a set of 3.42 ring and pinion set.
These gears will be a direct bolt in to your 1968-1970 Original Skylark, GS, Custom etc. A-body car and or Wagon.

These gears are TOTALLY amde in the USA from design by Fabcraft Metalworks in Texas to casting and machining in Wisconsin. Then to you the Customer. Gears are forged from 8620 top quality material.

The gears are399.00 for PRE ORDERS Till about the beginning of October. After that the price will go to 429.00 ish once they hit the shelf. There is a limited run of 25-30 sets only to see how they are received.

You can place your orders with BRAD/Susan at Fabcraft Metalworks toll free 1 800 208 8242.. 50% down is required or a full payment will also get the gears out to you much quicker once they are received from the manufacturers in Wisconsin.

So come and get them... 10 sets have been ordered already from most of the guys on the V8 Buick board. I am sure I will order a couple so 1/2 are almost gone already. Think of a great Christmas gift for your self and next spring you will be ready to roll out with a quality set of gears with a much better ratio to cruise or get that Buick out of the hole at the track!

Any questions of ordering/installation or general... can be answer here at J D Race.com or with Brad and Susan at Fabcraft Metalworks.
Attachments
100_7685.JPG
4 spider gear posi 3.64 gears.jpg
BUICK REAR 68 -70 EXAMPLE ONE FIN.jpg
J D Race
Post Reply