www.jdrace.com

Hello Jim and Guys...

Anyone know what rear sway bar must i use if i bold a weaky G-Body 7,5" 10 bolt rear in a A-Body car (oldsmobile 65),a A-Body or G-Body sway bar???

I know that many G-body guys use A-body 10 or 12 Bolt rears but which sway be he used,i don´t know ..maybe you guys have any advice?

The rear are installed with the factory A-body rear arms....and Jim,she´s still alive!!!


Regards from Germany
denis

Well that depends on the control arms...If they have sway bar access holes I would have to say a-body sway bar. But you also need to recognize if you had to pull the arms in and if you did then the G-body sway bar will work if the proper holes are drilled in the a-body control arms.

Do you have an inside measurement where the sway bar is suppose to go? Jim

hello Jim.........

problem solved,i need a A-body bar........


thanks
Denis

So your installing a G-body in a A-body 65-72 chassis? Man how depressing you have to go down to a 7.5 rear.

How are you getting the upper to fit? Seems like the arms will not be long enough causing the pinion angle to be WAY off and the binding of the suspenion. ??? Let me know Pictures etc. Jim