I have a posi out of a 71 Centurion to install in my 71 Centurion.
It looks like I need a "crush sleeve" and a pinion seal to trade these.
Are these sleeves available for the 9.375" pinion?
Or should I install the original ring on the posi carrier and not mess with changing the pinion?
Ted Nagel
9.375 Parts? Big Buick
-
- Rookie Poster
- Posts: 15
- Joined: Mon Jul 31, 2006 3:25 pm
- Location: Cincinnati, Ohio
9.375 Parts? Big Buick
Wildcat.
-
- Rookie Poster
- Posts: 15
- Joined: Mon Jul 31, 2006 3:25 pm
- Location: Cincinnati, Ohio
Right! I know mixing them is not an option. What I was thinking is either
1 replace pinion and ring w/posi, possibly requiring new crush sleeve.
or
2 keep current pinion in place, pull carrier, swap rings put current ring on posi carrier, re-install.
I had not thought of option 2 till I was writing the post!
Thanks Jim
Ted
1 replace pinion and ring w/posi, possibly requiring new crush sleeve.
or
2 keep current pinion in place, pull carrier, swap rings put current ring on posi carrier, re-install.
I had not thought of option 2 till I was writing the post!
Thanks Jim
Ted
Wildcat.