Need rear end for 84 gmc g2500 van

If you want certian parts this may be the place to find them. Just ask someone may have just want you want.
bigroneshouse
Rookie Poster
Posts: 13
Joined: Mon Jun 08, 2009 4:49 pm
Location: North olmsted,ohio.

Need rear end for 84 gmc g2500 van

Postby bigroneshouse » Mon Jun 08, 2009 11:44 pm

i need a rear end for my work truck,i prefer a good used one because cost of new or rebuilt is a problem,hell at this point im willing to trade my plumbing and home renovation skills to someone that has the rear end i need,i need my truck on the road,im losing to much money looking at my truck in driveway.

User avatar
monzaz
Average Poster
Posts: 831
Joined: Tue Nov 13, 2007 7:56 pm
Location: RICHFIELD, OH

Re: Need rear end for 84 gmc g2500 van

Postby monzaz » Fri Jun 19, 2009 12:47 pm

We need to know the size of the diff. 14 bolt 9.5 ich ring or 10.5 full floater... We need to know this so you have a good bolt in rear. PLUS the gear ratio will be needed. Jim
J D Race

bigroneshouse
Rookie Poster
Posts: 13
Joined: Mon Jun 08, 2009 4:49 pm
Location: North olmsted,ohio.

Re: Need rear end for 84 gmc g2500 van

Postby bigroneshouse » Sat Jun 20, 2009 12:29 am

1984 gmc g2500 van,the engine i have is a 4.1 250 cid inline six cylinder,my trans is a 700r4 and my rear end is a 8.5 10 bolt rear end and the gear ratio is a 3.42,what gear ratio should i run is this van considering this is a work vehicle,im trying to get good gas mileage,but i dont want to lose to much towing capacity,i do use a a trailer ocassionally,would a 3.73 work well or should i stay with 3.42,and also do you have a rear end i can get from you,or can you just rebuild mine,thanks jim.

User avatar
monzaz
Average Poster
Posts: 831
Joined: Tue Nov 13, 2007 7:56 pm
Location: RICHFIELD, OH

Re: Need rear end for 84 gmc g2500 van

Postby monzaz » Fri Aug 21, 2009 10:53 am

I have a rear here from a pick-up truck 6 lug has all the good stuff in it 3.73 and posi too I do not know if you took care of the van yet but this could be an option. Jim
J D Race


Return to “Parts Wanted”

Who is online

Users browsing this forum: No registered users and 1 guest